Wall boiler Russian. Russian-made gas heating boilers: a brief overview of the modern market
On this tab, we can define certain structural units for the desired garage. The garage heating assembly has some components. Each element is very important. Therefore, the selection of each element of the system must be done correctly. The heating scheme includes a connection system, pressure-increasing pumps, fasteners, pipes, thermostats, batteries, an expansion tank, collectors, and an air vent boiler.
Gas floor boilers Russian production also issued by Closed joint stock company"ZIOSAB". The plant produces over 15 models of boilers. The plant produces boilers own production, and under the license of the Finnish company "Finraila".
CJSC "ZIOSAB" manufactures boilers taking into account the world standards of boiler building, both minimum power and fairly powerful boilers with a value range up to 3000 kW.
According to consumer reviews, Russian-made gas floor-standing boilers are not able to compete with European manufacturers.
Russian manufacturers of gas boilers
In Taganrog, there is a plant for the manufacture of boiler equipment - Lemax. Models produced at the plant consist of imported components and operate on both gas and solid fuels. Lemax produces models of boilers with one circuit and double-circuit models. Most popular models manufacturer Lemax: Leader, Gazovik, Plus.
In Russia, there are other companies manufacturing heating equipment: the Mimax plant (Taganrog), the Rostovgazapparat company.
Complete set of domestic gas boilers. Types of boilers
A wall-mounted boiler is usually considered compact, to some extent, this is true. For example, Buderus floor gas boilers will be more than 30 percent of the wall line of the same manufacturer. These devices have three mandatory element: gas burner, fittings for adjusting the gas supply and the heat exchanger itself. You can find steel and cast iron heat exchangers, but due to their greater weight and high cost, they still prefer to replace them with copper ones. Also, do not forget about the built-in automation of the boiler.
Additionally, any wall-mounted device contains a built-in pump that drives water around the circuit, an expansion tank and safety valve. Mandatory system of control, protection and self-diagnosis. She "vigilantly" monitors the state of the fuel: in case of leakage or lack of gas, the automation stops the work, gives a signal about a malfunction. The Zhukovsky floor-standing gas boiler (or a floor-standing unit of any manufacturer) will work in the same way.
Mini-boiler rooms located on the floor have, in fact, the same device as wall-mounted units. They are based on the same heat exchangers, usually installed from a copper composition (with operational errors and for reliability, they often use and steel structures). IN heating boilers gas floor burners install two types of burners: atmospheric and pressurized (also called mounted, fan, replaceable). Atmospheric ones are somewhat cheaper, they work silently. Hinged structure more powerful, works with full efficiency, but the price for it is always set higher. As a rule, Ferroli boilers are bought with such parameters - which have proven themselves both in quality and design.
Outdoor gas boiler: how to choose the right one
The choice, first of all, should be made taking into account both the proposed area for heating and the power level, which does not always mean the same thing. In the absence of space, also in small spaces located in middle lane, you can do with an ordinary mounted boiler. But in the case of a house built in a cold climate with great need in heating it is better to choose a more powerful unit. For floor gas heating boilers, prices are higher, but the efficiency of work will be appropriate.
By the way! Wall-mounted devices are considered the cheapest (installation can cost up to $ 1000), easy to install, suitable for small spaces.
Quite often they are single-circuit, which allows only heating the room, for example, you need a boiler to heat water. Of course, there are single-circuit floor-standing gas boilers, but even their heating power is much higher. Such a mounted boiler will suit the owners small house that use other means to heat water: a boiler, a column, a fireplace with a water circuit, and so on.
Most owners of private households with an area of 200 square meters or more will prefer floor version with power control. These most reliable devices (with the same “stuffing” as the mounted unit) require maintenance approximately every three years, give more power. Their cost is higher, especially if it is a gas double-circuit floor or wall-mounted boiler, in principle it does not matter, one piping of a floor gas boiler will cost at least 500-600 USD. but subsequent minimum expenses on services in a life compensate for it.
Generally divided into two areas
Floor-standing units with a double circuit will be beneficial to owners big houses that were "conceived" without being connected to central system initially. Single-circuit floor gas boiler - not the most convenient option, since you have to branch the system even more when you turn on, for example, a column. The dual-circuit system, although it does not allow you to work in the heating and water heating mode at the same time, this is leveled out thanks to the simple laws of physics.
Russian floor-standing gas boilers today are presented in a wide range of products, among which you can find enough inexpensive options acceptable to many domestic families. Tellingly, today these neat devices are not "sillier" than their foreign counterparts. It is also worth noting that in the domestic market, industrial gas boilers are gaining no less popularity than domestic ones.
By the way! They are equipped not only quality boards, but also weather-dependent automation, which allows you to keep the temperature in the house from fluctuations even before the moment when it changes inside the room.
For example, Lemax floor-standing gas boilers with a similar modern thermostat “thinly” feel weather. To do this, their temperature sensors are also taken out into the street. The devices measure the temperature there, and already according to these indications, the floor boiler can be reprogrammed in advance for changes in the microclimate in the house itself.
A little more about Russian production
Other Russian high-quality outdoor gas boilers "Buderus" allow you to adjust the "weather in the house" for some period of time, setting indicators. For example, during the week, the owners will not be at home more often than usual, so you can reduce the power of the boiler. And for the Christmas holidays, all family members will gather in the family nest - the boiler is programmed to work with maximum efficiency. This greatly simplifies the life of the owner of a private house: he does not need to worry about the temperature in the house, he only needs to spend 15 minutes on weekends setting the thermostat.
Reviews of domestic floor-standing gas heating boilers are usually positive. This suggests that Russian masters have long since learned to produce beautiful, high-quality and, most importantly, reliable products with excellent automation. Also, the purchase of such boilers can be much cheaper, and the maintenance of Russian equipment will be carried out by specialists from the manufacturing plant itself. They know their product better than anyone else, and repairs will not have to wait a long time - all spare parts are “at hand”, and not in a foreign company.
There are many manufacturers of floor gas boilers in Russia, whose products differ in the type of heat exchanger, the number of circuits, power and other characteristics.
Material of heat exchangers
Heat exchangers in domestic single-circuit gas boilers are made of cast iron or of stainless steel. Cast iron elements have good heat dissipation and high performance. Such heat exchangers can last for several decades. Cast iron is impact resistant aggressive substances and corrosion. The heat exchanger is assembled from it in sections, and in the event of a breakdown, it can be repaired by replacing the element.
The disadvantages of cast iron boilers include:
- big weight;
- high price;
- requires care when using due to fragility.
Heating units with stainless steel heat exchangers they cost less and weigh less, but they are more susceptible to corrosive processes and last up to 20 years.
Domestic manufacturers, focusing on demand, produce more floor models with steel heat exchangers, as they are much cheaper and easier to operate.
In double-circuit floor standing boilers secondary heat exchanger that works on supply hot water, usually made of copper and has the form of a coil that encircles the primary circuit.
Note! For domestic double-circuit units, heating and hot water supply cannot work simultaneously. When turned on DHW heating coolant in the primary circuit stops.If you turn on the hot water supply for a short time, then the coolant temperature has time to drop by 1-2 ºC, which is not significant.
For getting more warm water with minimal gas consumption, a scheme is used when a boiler is connected to a single-circuit unit indirect heating. Domestic floor gas boilers are fully adapted to the quality of Russian gas and water in the pipeline.
Energy independence
An important parameter by which a gas boiler is chosen is its non-volatility. A common problem in the Russian hinterland is frequent power outages. Great solution in this case it becomes a non-volatile boiler. It works on mechanical control and with the help of physical phenomena. The required mode is set manually.
Volatile domestic units are distinguished by the presence of many functions. They are equipped with imported automation. Located in the body circulation pump, which causes the coolant to move. Automation provides control over safety, operating parameters and maintains the set heating mode.
Volatile heating devices consume less gas, as they are equipped with a two-stage burner operating in two modes: at 35% and 100% of the rated power. In this case, fuel savings are about 30% compared to non-volatile boilers.
"Pros and cons" of domestic gas boilers
The advantages of domestic gas boilers are as follows:
- work on almost any gas pressure;
- heat exchangers withstand hard water;
- easier to find spare parts;
- cheap accessories.
But the presented units have a lot of disadvantages.:
- yield leadership in reliability and efficiency to foreign analogues;
- automation of work processes is done with shortcomings;
- short service life;
- no models with modulating burners and microprocessor control.
Thanks to the perfect automation of foreign-made heating devices, they consume 30% less fuel than domestic ones. Appearance and ease of use Russian units are also inferior to foreign ones.
The most popular brands of floor gas boilers
Consider the products of the most famous Russian companies that produce floor-standing gas boilers.
Heating devices "Lemax"
gas boilers Lemax is manufactured at an enterprise in Taganrog. They are produced with cast iron and steel heat exchangers. Lemax products are divided into 3 series:
- Premium class boilers up to 40 kW are made of high quality steel and covered with an anti-corrosion coating. They are equipped with protection against overheating, cessation of traction and the formation of soot.
- Premium Nova equipment has an open firebox, steel contours and special automation.
- Single-circuit gas boilers Leader 40 are able to heat a room up to 390 m². The primary Czech heat exchanger is made of cast iron. Even though Leader 40 is not dependent on electricity, it consumes some gas.
Products of the Zhukovsky plant
The Zhukovsky plant produces reliable and low-cost devices that operate autonomously and do not depend on power supply. The most powerful of them are able to heat an area up to 600 m². Floor gas boilers are represented by three main lines:
- Economy class units - equipped with foreign automatics SIT;
- devices of the Universal class - equipped automatic system Mertik Maxitrol;
- Comfort class boilers are equipped with automation developed in-house.
The efficiency of dual-circuit models is 88%. This is enough to get hot water after opening the tap. Floor gas boilers manufactured by ZhMZ are produced in the form of a cylinder or a square. The entire model range is equipped only with steel heat exchangers.
Equipment of the plant "Conord"
The model range of the Conord plant has a wide range of capacities. The boilers are equipped with a steel heat exchanger and have an efficiency factor of 91%. Single-circuit units are equipped with Italian-made automation. Dual circuits are equipped with SIT automatics. She is watching safe work unit. In the event of a failure or breakdown, the automation stops the boiler.
Heating devices Conord are able to work even with low pressure fuel in the pipeline. They have compact dimensions, low noise level and beautiful appearance. In the video you can see how to replace the old AOGV model with a new one.
Floor boilers "Signal"
Gas units "Signal" are produced in Engels. They produce single-circuit boilers and double-circuit power from 6.4 to 40 kW. The units of the presented brand are equipped with steel heat exchangers, burners, safety sensors and an automatic control system. They are comfortable, easy to use and can last almost 20 years.
"Borin" gas boilers
Floor-standing single-circuit and double-circuit gas boilers are produced in Lipetsk. The power of the Borinsky devices is enough to heat a room from 90 to 300 m². There are models that are equipped with both imported and domestic automation. The presented gas boilers are different high efficiency, simplicity, reliability and economy. Their automation ensures high safety, as well as precise and stable operation.
The disadvantages of the "Borin" floor gas boilers include high sensitivity to gas quality and susceptibility to corrosion.
The best domestic floor gas boilers
Having studied all the proposals of the domestic market, gas boilers were selected in the following categories:
- the cheapest;
- the most economical;
- the most convenient to use.
Rostovgazoapparat AOGV 11.6
The most affordable gas boiler domestic production Rostovgazoapparat AOGV 11.6. This is a single-loop model of the convection type. With a power of 11.6 kW, it can heat a house up to 100 m². Its efficiency is 90%. The unit is independent of electricity and can operate both on natural and on liquefied gas.
Note! Most of all, such a unit is suitable for summer residents and residents of regions where there is no centralized heating and power outages often occur.Consumers appreciate the unpretentiousness, availability and ease of maintenance of this model. By cons gas boiler include: outdated automation, outdated appearance and errors in the readings of a pointer thermometer.
The presented floor gas boiler with a capacity of 8 kW can heat a dwelling with an area of 80 m². Its main advantage is a record low gas consumption - 0.4 cubic meters. m/h This boiler is a single-circuit model equipped with an injection micro-torch burner and a steel heat exchanger with an anti-corrosion coating. It also has protection against overheating and traction interruption. The operation of the unit does not depend on the power supply.
ZHMZ AOGV-23,2-3 Comfort N
The AOGV-23.2-3 Comfort N model is considered the most convenient. It replaced outdated modifications. The advantages of this boiler are: affordability, ease of installation and operation. It has a capacity of 23.2 kW, which is enough to heat a room up to 200 m². The unit can operate on main or bottled gas, equipped with open cam combustion and mechanical control. The safety of work is controlled by foreign Honeywell automation.
Looking to buy a gas boiler? The online store Termomir presents wide choose heating and water heating equipment from leading Russian and foreign manufacturers.
Our catalog includes gas boilers of the following types:
- Double-circuit. Do you need a gas boiler for heating a private house? A double-circuit device will be a good choice for a home or a summer residence: a heating boiler of this type, in addition to being used for its intended purpose, can work as instantaneous water heater providing space hot water. In summer mode, water heating does not require the heating to be turned on!
- Single-circuit. Single-circuit heating boilers are designed for space heating, however, when buying an indirect heating boiler (in individual models supplied from the factory), can perform the functions storage water heater. It should be noted that this function does not affect the quality of heating in any way. Gas heating boilers in summer time can only work in hot water mode.
- Floor-standing gas boilers for a private house, the prices for the initial models of which are quite low, differ good performance performance, reliability, unpretentiousness, environmental friendliness and really high service life. A foreign-made heating (gas) boiler can easily be in operation for 50 years or more. Of the minuses, it is worth noting the need for a separate room with high-quality ventilation system, as well as a channel for output flue gases.
- Wall-mounted gas boilers in Belgorod are very popular. Their main advantage over floor counterparts is low requirements: they do not require separate room, equipped as a mini-boiler room.
You can buy a gas boiler in Belgorod without leaving your home, directly on the website of the Thermomir online store. Looking for a specific wall-mounted or floor-standing gas boiler for a private home? The price, type of boiler and other parameters are set using a special filter on the left side of the site. Knowing exactly what you need, you will quickly and easily find it in our catalog.
Poor understanding of the topic? Not sure what is the best choice for your specific situation? You see similar gas boilers, the prices of which differ significantly, and do not understand why? Just call the number indicated in the header of the site and our specialists will absolutely free of charge help you choose the equipment that is best suited for solving your particular problem. You can place an order right away!
We remind you that there is a delivery service for residents of Belgorod and the region. You can check the details by contacting our operator, or by visiting the appropriate section of the site.
The heating equipment market is represented by a huge variety of models, as well as manufacturers. Moreover, not only foreign brands are in great demand, Russian companies do not lag behind them in popularity.
Some of them have been producing gas equipment for a very long time and managed to prove themselves from the best side.
Floor-standing gas boilers of our production are in the greatest demand, and this is not surprising. They have a long service life due to their design features, besides, they are cheaper than foreign analogues.
Variety of boiler equipment
Local manufacturers produce floor heating devices various modifications. They are divided by type of fuel into:
- running on natural or liquefied gas
- solid fuel
Floor-standing gas boilers made in Russia have a power range from 11 to 68 kW and can be used not only for heating private households, but also in industry and agriculture.
All models domestic manufacturers are carried out taking into account the peculiarities of the gas pipelines of Russia and the CIS countries. This means that they work successfully under reduced pressure. As a coolant in such models, not only water can be used, but also non-freezing low temperatures liquids.
The latest samples tend to minimize the size, which gives great opportunities when choosing a room for their installation.
Popular Russian manufacturers
Outdoor gas equipment produces several domestic enterprises. The most famous of them is the Zhukovsky Machine-Building Plant (ZHMZ). It was organized in 1939 on the basis of repair shops.
Initially, the enterprise specialized in the aerospace industry, and only since 1967, the production of boilers of the AGV-120 series was launched.
It turned out to be successful and after a short period of time it was already in great demand. Today, the company's product range includes about 400 models. Of these, the floor include:
- KOV-STPV
- S-Term
JSC ZhMZ is the largest Russian manufacturer. Its products are in great demand not only in Russia, but also in neighboring countries. It is considered reliable and inexpensive, as well as completely autonomous and independent of electricity.
One more is enough well-known manufacturer boiler equipment is the Borinskoye plant. It got its name from the village in which it is located. First gas appliances the company began to manufacture in 1976, and by 1992 it was already a fairly well-known company, actively developing its production.
A number of devices are equipped with foreign automation, for example, the EuroSit brand. Except gas models The plant produces solid fuel and universal heating boilers.
The Lemax plant, located in Taganrog, began its production of boiler equipment in 1992. Now the company produces single-circuit and double-circuit models that operate on both gas and solid fuels. All of them are assembled from imported components. The most famous samples from this manufacturer:
Another enterprise located in Taganrog, which also specializes in the production gas equipment- Mimax factory. It produces two series of equipment:
Rostovgazapparat is a company that has existed since 1959. Her production capacity located in Rostov-on-Don. It produces equipment with cast iron and steel heat exchangers.
The range is represented by the following models:
- AOGVK Rostov
- KGDO Siberia
- AOGV Rostov Siberia
All samples are equipped with imported automation.
Most wanted models
It is very difficult to consider the features of absolutely all devices of domestic equipment, so we will focus on those that are in the greatest demand among the population. One of them is a Russian-made gas floor-standing boiler AOGV, manufactured at ZhMZ.
The main heat exchanger for them is manufactured on an automatic line, which allows you to avoid marriage. Its design uses turbulators that change the direction of the exhaust gases and, taking heat from them, transferring it to the heating system.
In such devices, the efficiency reaches 89%. In double-circuit models, an additional circuit is made of copper, which allows you to get hot water immediately when you open the tap. The boilers have a new burner design that provides complete combustion fuel and work at reduced pressure in the gas line.
Advantages and disadvantages of domestic equipment
You will not surprise anyone with new devices in the heating industry. Manufacturers offer a wide range of such products.
Usually the preference is given to quality and conformity climatic conditions. These parameters are fully met by floor gas boilers, which are produced by Russian manufacturers.
The devices have a number of advantages:
- have optimal efficiency
- the cost of equipment is much lower than foreign
- can be used for any area - from the smallest to the largest
- a large service base and the availability of spare parts in any corner of the country
But, speaking of the advantages, it is impossible not to note the disadvantages that take place:
- large dimensions and weight of the boiler
- appearance that does not fit into the modern design of the room
- not enough hot water
- the impossibility of installing several heating circuits and adjusting the temperatures in the heating system
Which model to choose?
The greatest demand among the population is for floor-standing gas heating boilers of the AOGV and AKGV series, OJSC ZHMZ Russia produces them in the following versions:
- economy
- station wagon
- comfort
This gives the consumer the opportunity to choose the model that is optimal for him, both in terms of design features and price.
