Make a children's high chair on a home woodworking machine. DIY children's table and chairs. Video #4: direct keyway connection for joining board panels

05.11.2019

Furniture for a children's room should be of high quality, environmentally friendly, and hypoallergenic. But many manufacturers do not pay attention to the increased requirements for children's furniture - they use low-quality materials and make the fastenings unreliable. Using such furniture may harm your child. That's why some parents come to the conclusion that it is worth making a children's table and high chair with their own hands. Moreover, assembling it is not so difficult.

Materials

Of course, when choosing material for children's furniture, you should opt for natural solid wood. A wooden table and chair will not only be a decoration in a child’s room, but also environmentally friendly, will not cause allergies, and will become practical pieces of furniture.

It is better to make a table and chair from beech wood. It is easy to process and does not release resin. But as a budget option, pine or birch are quite suitable, only they need to be deresined, since the resin is unsafe for a child, and it can ruin clothes.

Plywood, as the cheapest material, is also quite acceptable when making a highchair. It can easily bear the weight of a child, is lightweight, and can be easily processed.

Chipboard is a very fragile material and can only be suitable for a tabletop.

As an option, you can build a table and chair from plastic bottles in the playground area at the dacha. At the same time, you practically do not need to invest money, and if exposed to weather conditions, such a kit will not suffer.

Preparation

Initially, you need to make detailed drawings with all dimensions. Please note that when planning furniture for a child, you should not make sharp corners that could injure the child during active games.

If you're not entirely sure about stability, make a 1:1 scale model out of cardboard before making parts out of wood.

To fasten parts together, you can use spikes and glue, but for the reliability of the structure it is better to use self-tapping screws and corners of various shapes.

Material processing

Before assembly, all parts must be processed. To do this, you can use an electric planer, or sand the wood with sandpaper.

Then you can treat it with various dyes such as stain, rather than simply highlight the texture of the wood or paint it.

If you want to varnish your products, it is better to choose one based on turpentine. It does not contain toxic substances and will not harm your child's health. After you have coated the parts with varnish, you need to sand it with sandpaper. And then cover with a finishing layer of varnish. In this case, the wood will be well protected, and the shine will not disappear for many years.

Making a regular chair and table

To assemble a regular chair, we need to cut out the following parts:

Short legs - 2 pieces, length 25 cm, cross-section 3.3 x 3.8 cm.
Long legs - 2 pieces, height 53 cm, cross-section 3.3x3.8 cm.
Back - 1 piece, size 10x30 cm.
Seat - 1 piece, size 30x30 cm.

Crossbars for tying a chair under the seat - 2 pieces, 25.7 cm long, 2 pieces 25.2 cm long.

In this case, the legs should have a narrowing from the middle of the chair. For long ones, reduce the thickness towards the top to 1.9 cm, and short ones - towards the bottom to 2.4 cm. This is necessary so that the front legs do not interfere with the legs, and the back is at a slight angle.

First, we attach the rear legs; to do this, we screw the crossbar between them with self-tapping screws. We do the same with the front ones and fasten them together.

Then we screw the back. We check that all parts have a clear horizontal fastening. Otherwise, the aesthetic appearance of the chair will not be very good.

At the end of the assembly, screw the seat.

For the table we need 4 legs, a frame made from the same block. We make them from a block and the tabletop is made from plywood or chipboard. The sizes here depend on your wishes and the height of the child.

We assemble the harness, attach the legs to the corners and screw the tabletop on top. The table is ready. The size of the screw must be carefully selected, otherwise you can drill right through the tabletop, which will ruin the aesthetic appearance and may injure your child.

Making a chair from plywood

Since plywood is easy to process. It's easy to make a carved chair out of it.

In order to make it you will need:

Sheet of plywood, 8 mm thick.
Drill, jigsaw.
Drill, screws.
Sandpaper.
PVA glue.
Colorless varnish based on turpentine.

Based on our dimensions, we transfer the drawing of the chair onto a sheet of plywood. You can use a jigsaw to cut unusually shaped holes, which will give the chair an interesting look.

In order for the sides of the chair to be completely identical, you must first cut out one, then trace it on a sheet of plywood so that the second side wall completely coincides with the first.

You can make them in the form of an elephant. You will get an original design of the chair.

After all the parts are cut out, the sections must be carefully sanded using sandpaper.

We assemble the chair, to do this we attach the seat and back with glue, and secure everything with self-tapping screws.

We coat the chair with varnish.

Making a high chair for feeding a baby

The simplest model of this chair is a transformer, which easily folds out into a separate small table and chair.

We make the base from solid wood, the back and seat of the chair from plywood. The tabletop is made of laminated chipboard.

We will need a wooden block with a section of 20x40 mm, laminated chipboard, size 200x340 for the table top on the chair and 450x380 mm on the table, plywood for the seat. In the absence of laminated chipboard, countertops can also be made from plywood.

First we assemble the table. We make two frames from the bars. We connect them with crossbars so that later the chair legs can be inserted between them. Screw the tabletop.

The chair is made in the same way as a regular chair, only we use plywood for the seat and back, onto which you can sew an oilcloth cover and insert foam rubber for softness. This will make it easy to wash the high chair if your baby gets it dirty with food, and will not allow the foam rubber to get wet.

Other types

You can also make garden furniture from plastic bottles. To do this, select bottles of the same size. A 1 liter capacity is quite sufficient for a child. We wrap it with tape to form a seat. To ensure a smooth surface, cover with a wooden box. All that remains is to sew a leatherette cover, and an excellent stool for the garden is ready.

How to decorate

Even the best quality handmade furniture may not please your child. Therefore, it needs to be decorated. You can use different methods for this.

Bright paint. This is the simplest method. Before varnishing, you can paint the table and chair with bright paint, thereby attracting the child’s attention.

If you have the ability to draw, you can draw various cartoon characters or simply apply a child's drawing.

If your chair does not look very beautiful, but is reliable, then all the flaws can be hidden by sewing a fabric cover. It can always be washed if necessary.

Another method of decorating a chair is stickers. You can buy them ready-made or make them yourself from self-adhesive film using a stencil.

Design

You can make any chairs and tables with your own hands, as long as your imagination and ability to use tools is enough.

This set of table and chairs is durable, beautiful, it is simply ideal for a children's room, you can also make such a set for a kindergarten or school. By making such a kit with your own hands, you will greatly delight the children, while saving a lot of money.

The table cover and chair seat have rounded corners to prevent children from being injured by bumping into them. The height is suitable for children aged 2 to 8 (depending on size).

The chairs have attractive heart carvings on the back of the chair, the same on the table backsplash.

Such a set can be made from MDF, 16 mm thick, and pine. Individual elements can be ordered and cut to your dimensions in any carpentry shop, then you just need to assemble everything together. The design turns out to be very durable (I personally checked the entire assembly while sitting on it).

To make such a kit we will need:

TABLE :
1,600 x 600 mm, 16 mm thick - table top;
4 elements 70 x 504mm, thickness 1 6 mm - aprons at the bottom of the table with cut out hearts;
4 things. 32 x 32 x 584 mm - table legs.

CHAIR :
8 pcs. 32 x 32 x 700 mm - rear legs of chairs;
8 pcs. 32 x 32 x 334 mm - front legs of chairs;
4 things. 340 x 350 mm MDF 16mm thick – seats;
8 pcs. 40 x 26 mm MDF 16 mm thick - strips for attaching a chair;
4 things. 155 x 270 mm MDF 16 mm thick - chair backs, curved with cut out hearts;
8 pcs. 40 x 2 70 mm MDF 16 mm thick - front / back strips;
8 pcs. 40 x 26 mm MDF 16 mm thick - strips for side supports of the chair;
4 things. 40 x 2 86 mm 16 mm central strips;
Wood glue;
Putty;
Primer for wood;
Acrylic paint with glitter.

TOOLS:
Drill;
Random orbital sander 80-, 120- and 240-number sandpaper;
Jigsaw;
Tape measure and pencil.

Progress of work on the manufacture of a children's table and chair

Preparation

The decorative part of this project is cutting heart shapes into the bottom of the apron and on the backs of the chairs. First we draw a template, for this we use a jigsaw. We cut slowly and carefully, and then sand with sandpaper. Next, cut out a slight curvature on each back, at the top.

In addition, it is necessary to make a 40 mm cut on the side (340 mm edge) and 32 mm on the back (350 mm edge) to attach the rear leg.

Before we start assembling, we will sand all the corners of the table and chair.

1 . Attach the front legs to the front support rail, making sure the top edge is level.

2 . Assemble the back of the chair by securing the back legs to the back of the chair. Connect all the elements using a screwdriver and self-tapping screws.

3 . We connect the sides together, fasten them with screws and glue, as shown in the photo.

4 . Attach the frame and two side drawers to the rear leg.

5 . Assemble the front part as shown below.

6 . Secure the chair seat with self-tapping screws.

ABOVE: The chairs are ready for sanding and painting.

7 . Assemble the table, starting by attaching the legs to the aprons. Make sure the splashbacks are flush with the top of each leg before attaching the tabletop.

Finishing work

Fill all screw holes with putty. Let dry and then sand with 240-grit sandpaper. Wipe to remove all traces of dust.

Treat all areas of wood with primer. Wait until everything dries.

Apply two to three coats of acrylic glitter paint, allowing time to dry between each coat.

Purchased furniture for a child’s room, especially made from natural materials, can be quite expensive. In a store or online, you don’t always find exactly the option you like. You can create a children's high chair and table from wood yourself. The work will not be difficult if you prepare all the necessary parts and tools, use your ingenuity and imagination. The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

You can create a children's high chair and table from wood yourself.

The benefits of making a high chair with your own hands

A DIY chair will cost much less, and one made according to your own sketch will meet the intended parameters and the required degree of comfort for the baby.

The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

All natural wood parts can be purchased in specialized departments of construction stores. They will select boards and bars of the required sizes for you.

A DIY chair will cost much less.

A child's high chair, created with one's own hands, is high-quality furniture for a child. In the process of work, you take into account the dimensions of the seat and backrest, which are as comfortable as possible for a growing baby, and check the strength of the structure directly at home.

All natural wood parts can be purchased in specialized departments of construction stores.

A wooden chair you create with your own hands can be decorated to your liking, rather than being satisfied with a ready-made solution for purchased furniture.

They will select boards and bars of the required sizes for you.

Required materials and tools

To create a chair you will need various materials. Individual parts will be made from them. First of all, these are wooden blocks and boards from which the frame, seat and back are assembled. Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable. For fastenings, take sufficient self-tapping screws. You will need medium-hard sandpaper.

A child's high chair, created with one's own hands, is high-quality furniture for a child.

Dimensions of bars (length):

support legs – up to 20 cm;
seat frame connecting strips – up to 20 cm;
backrest lintels – up to 20 cm.

A wooden chair made by yourself can be decorated to your liking.

During the manufacturing process, the thickest bars with a cross-section of 5x5 cm are used for the legs. For the planks, parts are taken with a diameter half the size of the supporting ones.

For the planks, take parts with a diameter half the size of the supporting ones.

The parameters of the seat board (height and width) should also not exceed 20 cm. The back part may be slightly higher, but preferably no more than 30 cm.

they are less durable;
The environmental friendliness of such products has not been 100% proven.

The parameters of the seat board (height and width) should also not exceed 20 cm.

To make a chair with your own hands, you need the right tools:

screwdriver;
screwdriver;
jigsaw;
hacksaw for wood.

The dorsal part may be slightly higher, but preferably no more than 30 cm.

The assembled chair will “require” original decor. In addition to the carved option, you can use paint or other materials to apply a design or appliqué. To accurately apply the image you will need a stencil.

The assembled chair will “require” original decor.

Deciding on design and construction

For a wooden product, you can come up with any option. A highchair is usually made with straight supports and the following forms of the back structure:

solid square or rectangular;
wide truncated cone;
straight through (with jumper bar).

To accurately apply the image you will need a stencil.

Creating a product with your own hands requires careful preparation. You must first make a sketch of the project. Visually draw a diagram of the connections of all parts separately with calculations of sections and lengths. Following the sketches, you will recreate the model in reality with exact parameters. A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

For a wooden product, you can come up with any option.

Certain models are created with the expectation that the child will sit at a common table with other family members. In this case, high legs are chosen for the product, which are not attached exactly vertically in relation to the seat and floor, but more widely. The lower part of such a chair will look like a truncated cone, connected for stability by wooden blocks around the perimeter. The top part will be approximately 30-35 cm below the table level.

A children's high chair is usually made with straight supports and the following forms of the back structure

If you have certain skills, you can assemble a folding product. Such items can be easily removed if necessary into storage areas.

For the chosen design solution, the parts are processed in accordance with it.

Manufacturing process: step-by-step instructions

After preparing a drawing with exact parameters, we begin to assemble a simple children's high chair.

Calculate the length of the legs exactly according to the diagram, saw off the excess with a hacksaw.
Cut out the jumper bars to size that will secure the frame in the seat area.
Connect them to the supporting structure. Add furniture glue for reinforcement.
Attach the pre-sized back and seat using self-tapping screws.
All wood parts must be cleaned with sandpaper to avoid roughness and burrs.

A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

If the parts are disproportionate, “adjust” them according to the design diagram using a hacksaw. To make the chair you created with your own hands comfortable, ask your baby to sit on it, ask how comfortable he is.

If all dimensions were determined correctly, the child will love the new furniture. To ensure the parts are smooth, sand the surface again.

Certain models are created with the expectation that the child will sit at a common table with other family members.

To varnish the product, use only safe compounds - a special coating for children's furniture, environmentally friendly and having the appropriate certificate.

The top part will be approximately 30-35 cm below the table level.

After finishing the exterior with varnish, let the chair dry thoroughly for a day or two. Then you can begin decorative finishing, if any is planned. If it involves carving, then varnishing is done after finishing the artistic treatment and sanding the parts.

Decorating a chair

Use a jigsaw for carving. You can make a decoration in the form of a flower, cutting it out in the center of the back, or any geometric shape. First, mark the area of the future decoration with a pencil so that the carving is even. Parts such as legs and back can be carved. The corners of the seat can be rounded using a jigsaw and sandpaper.

During the manufacturing process, the thickest bars with a cross section of 5x5 cm are used for the legs.

The top can also be made not strictly rectangular, but a truncated cone, rounded, compound. In the latter option, you will need additional bars and cross bars - one or two. They are secured using special holes at the junction with the dorsal frame. This is a rather labor-intensive process, but if you wish, you can choose this option.

For fastenings, take sufficient self-tapping screws.

All steps for processing parts must be performed before the chair is assembled - this way the work process will be faster, more convenient and neater.

If you have certain skills, you can assemble a folding product.

To make a home-made piece of children's furniture look more interesting, you can apply a design to the back and seat. To do this you need to use safe paints. The color scheme should be bright and cheerful. Simple ornaments, floral patterns, and imitation of children's toys, such as cars, look great on wooden furniture.

Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable.

Due to the fact that the size of the product is small, a large pattern will become a kind of accent that attracts the child’s attention - he will like to sit on such a beautiful chair, play games or have breakfast.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale.

The image will turn out smooth if you use a stencil pre-cut from paper or thick plastic.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale. Whether the image will be monochromatic or multi-colored depends on your imagination.

First of all, these are wooden blocks and boards from which the frame, seat and back are assembled.

It is not recommended to use bulky (protruding) parts, both small and large, in finishing the seat or back of a children's chair. Firstly, it is inconvenient for the child, and secondly, they quickly fall off with frequent use of the product.

To create a chair you will need various materials.

VIDEO: DIY high chair

50 photo ideas for DIY highchair design

berkem.ru

DIY children's chair

At the end of the article we posted

With your own hands

Cut from plywood

Drawings and assembly diagram

Blueprints. Dimensions. Scheme

Master Class

tow truck Meter

Growing chair for children.

Children's chair made of plywood

Design and materials

You will need:

small nails

Cut out the profile.
Glue the parts

So, let's begin!

What you will need:

2 sides 400 mm x 400 mm
Rear wall 400 mm x 364 mm

200 photos of chairs

novamett.ru

280 photos + Drawings Dimensions Instructions

DIY children's chair

Now we will look at making our own high chair for a child with and without a backrest. Check out the step-by-step photos, drawings, layouts and instructions for detailed photo master classes on creating the simplest, ordinary and original models. At the end of the article we posted more than 800 photos of a variety of chairs for children and also a large gallery of photos of stools and chairs with backrests for adults. The material used is wood and plywood. It's not difficult at all, simple and fast!!!

Note: Check out the article -

DIY children's table 800 photos, diagrams, step-by-step instructions

A stool-chair for a children's room in the form of puzzles.

These chairs are perfect for children and can go to a playroom or children's room, and would be an excellent solution for a kindergarten. The seats of the chairs are made in the shape of puzzles, and therefore, if necessary, these chairs can be combined into a single bench, which can be very convenient in certain cases. You can learn how to make such chairs with your own hands from the step-by-step photos below.

Photo source: instructables.com/id/HomeMade-Modern-DIY-Puzzle-Stool

Children's folding chair made of plywood drawings.

With your own hands

Cut from plywood

Photo source: www.object.md-design.ru/en/furniture/plywood-chair

A simple chair for a child with a backrest.

Drawings and assembly diagram

Look at the drawings for assembling a simple wooden chair for the kitchen below in the gallery of step-by-step photos. In this model, we can note a very simple solution for attaching the back of the chair, in which you don’t have to worry about the strength of the connection of the back with the rest of the chair and maintaining the angle of the back.

Photo source: www.ana-white.com/2011/03/harriet-chair

Children's high chair with bent plywood back